Coleman POWERSPORTS HS360ATV, Руководство пользователя

Страница: 56 / 175

Operation 6-3

If the engine fails to start, release the start
switch, then push it again. Pause a few
seconds before the next attempt. Each
cranking should be as short as possible to
preserve battery energy. Do not crank the
engine more than 10 seconds on each
attempt.

If the battery is discharged, pull the recoil
starter to start the engine.
8. If the engine is started with the starter (choke)
in position 1, the starter (choke) should be
returned to position 2 to warm up the engine.
If the engine is started with the starter (choke)
in position 2, keep the starter (choke) in this
position to warm up the engine.
9. Continue warming up the engine until it idles
smoothly and return the starter (choke) to
position 3 before riding.
CAUTION:
See the “Engine break-in” section prior to
operating engine for the first time.
Starting a warm engine
To start a warm engine, refer to the “Starting a
cold engine” section. The throttle should be
opened slightly.
Warming up
To get maximum engine life, always warm up
the engine before starting off.
Never accelerate hard with a cold engine!
To make sure the engine is warm, drive the
ATV one third throttle for 1.86 miles (3km), or
run 3 minutes at 2000 rpm.