14
15
AssEMbLY iNsTrucTiONs
e. Using the wing nut (#14), assemble the
side burner (DC) to the side burner
drip pan (DB), as shown.
f Locate the side burner electrode wire
(DD) and insert into the base of the
side burner electrode (DC), as shown
in figure E.
g. Position the side burner cooking grate
(DF) onto the side burner drip pan
(DB).
b. Position the electronic ignition box
(CE1) into the heat shield (CE1)
and feed the assembly through the
opening in the right side panel (EB)
and secure using the nut.
c. Insert a “AA” battery into the battery
compartment, as shown. Secure using
the ignition button cover (CE2).
YOU WILL NEED:
14
X 1
a. Remove the ignition battery cover
(CE2) and the plastic nut from the
electronic ignition box (CE1)
10
11
E
F
A
B
14
DB
DC
DD
DF
DB
CE2
CE1
EB
CE2
AssEMbLY iNsTrucTiONs
f. Insert the Instastart™ ignition button
(CE3) wires into the Electronic ignition
assembly (CE1), as shown in figure F.
e. Insert the Electrode wire, side burner
(DD) into the Electronic ignition
assembly (CE1), as shown in figure E.
11
TIP: The Electrode Set, main burner
(CF) and the Electrode wire, side
burner (DD), can be found attached
to the control panel (CH) heat
shield, as shown in figure C.
d. Insert the four Electrode set, main
burner (CF) wires into the Electronic
ignition assembly (CE1) as shown in
figure D.
C
D
E
F
DD
CF
CH
CF
CF
DD
CE1
CE1
CE1
CE3
