10
11
AssEMbLY iNsTrucTiONs
YOU WILL NEED:
6
7
8
d. Final image reflects the proper
assembly of the Quick Check
TM
fuel
gauge assembly (EL).
X 2
X 2
X 2
a. Assemble the left and right tracks
(CO and CN) for the Quick Clean™
grease tray (CJ), as shown in figure A.
b. Both the left and right tracks (CO and
CN) should be inserted into the two
clips located on the front brace (CI), as
shown in figure B.
c. Assemble the back of the left and right
tracks (CO and CN) to the upper back
panel (CL), as shown in figure C.
Back view
Close up, front view
Close up, back view
6
7
C
B
A
Front view
Front, right side view
View inside burner box
Back, right side view
YOU WILL NEED:
AssEMbLY iNsTrucTiONs
2
3
4
X 2
X 2
X 2
TIP: Do not tighten until all hardware is
in place.
a. Mount the right side shelf (DG) onto
the two hooks, located on the right,
upper side panel of the burner box
(BA).
b. Assemble the front of the right side
shelf (DG) to the control panel (CH),
as shown in figure B.
c. Assemble the right side shelf (DG)
to the upper side panel of the burner
box (BA), by positioning hardware
through the interior of the burner box,
as shown in figure C.
d. Complete the right side shelf assembly
(DG) by connecting the right side shelf
(DG) to the rear of the burner box side
panel (BA) as shown in figure D.
8
YOU WILL NEED:
2
3
4
X 2
X 2
X 2
5
X 2
A
B
A
A
B
B
A
B
YOU WILL NEED:
2
3
4
X 1
X 1
X 1
5
X 1
A
B
G
A
B
C
D
EL1
EL3
CO
CN
CI
CN
CL
CO
BA
DG
DG
CH
BA
DG
BA
DG
