STARTING ENGINE
To start the engine
1. Before attempting to start the
engine, make sure to follow the
pre-ride
inspection checklist in this manual.
2. Place the fuel valve (1) to the
“ON” position.
3. Turn the ignition key (2) to the
“ON” position.
4. Place the ON/OFF switch (3)
located on the handlebars to the
(ON) position
5. If engine is cold, place the choke
lever (4) in the up position.
Note: If the engine is already warm
the choke will not be needed.
6. Start the engine by depress-
ing the start button located on the
handlebars(5)
7. Once engine has warmed up for a
few minutes, place the choke lever
(4) back to the down position.
Starting or running the Dirt
Bike in an enclosed area such
as a garage or shed where
there is no ventilation is
hazardous.
Inhaling exhaust fumes from
the Dirt Bike can cause
severe injury or death.
Never start or run the Dirt
Bike in an inclosed environ-
ment where there is no venti-
lation. Always start and run
outdoors.
!
WARNING
RIDING THE DIRT BIKE
4
2
3
1
16
