(Pg. 28)
Ö
Ö
Assemble an LP CYLINDER to the Cylinder Caddy. See detail
26-A
.
Ö
Ö
Place the CYLINDER RETAINER WIRE over the Cylinder Collar. See detail
26-B
.
Ö
Ö
Attach the TYPE 1 fitting to the Fuel Valve Outlet per detail
26-C
.
Step
26
26-A
26-B
26-C
26-A
. Set LP CYLINDER in the cylinder caddy with
the outlet valve facing toward the front of the
grill.
26-B
. Place the CYLINDER RETAINER WIRE over
the Cylinder Collar, by rotating the wire from the
upward positon over the cylinder collar.
26-C
. Insert the TYPE 1 Nipple of the regulator into
the cylinder’s Fuel Valve Outlet as shown. Turn
the regulator hand wheel clockwise to tighten.
No tools are needed. The hand wheel will come
to a complete stop when the connection is
secure, and gas will not flow until a positive seal
is achieved.
Type 1 Nipple
Fuel Valve Outlet
WARNING:
During assembly of
grill and when attaching or replacing the
L.P. gas cylinder, insure that the gas
supply hose is free of kinks and/or
damage and is at least 3” away from hot
surfaces such as the grill casting.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
,
BURNER
CONTROL VALVES MUST BE
“OFF”
BEFORE
OPENING THE GAS CYLINDER VALVE
.
Cylinder Retainer Wire
Cylinder Collar
LP Cylinder
Cylinder Caddy
