12
13
ASSEMBLY INSTRUCTIONS
Right side panel, inside view
Right side panel, outside view
Right side panel, inside view
ASSEMBLY INSTRUCTIONS
a. Assemble the door assembly (EC), to
the bottom shelf (EE) by inserting the
fixed pin (bottom of door) into the
hole provided (figure B).
b. Assemble the top of the door
assembly (EC) to the door support rail
(CN), by pressing in the door support
pin and aligning with the hole located
on the top right corner of the door.
Tip:
Use a paint scraper to press-in the
support pin. The support pin will
lock into position when the door is
assembled correctly.
A
10
11
Electronic Ignition Assembly
a. Remove the ignition battery cover
(CC2) and the plastic nut from the
electronic ignition box (CC1)
c. Insert an “AA” battery into the battery
compartment, as shown. Secure using
the ignition button cover (CC2).
d. Insert the two Electrode set, main
burner (CD) wires into the Electronic
ignition assembly (CC1) as shown.
NOTE:
All main burner electrode wire
connection points are the same
size.
e. Insert the Instastart™ ignition button
(CC3) wires into the Electronic ignition
assembly (CC1), as shown in figure C.
A
B
C
CC2
CC2
CC3
CC1
CC1
EB
EC
EA
EB
b. Position the electronic ignition
box (CC1) through the opening
in the right side panel (EB) and
secure using the nut.
Bottom of door
Top of door
B
EC
EE
C
EC
CN
CD
