6
7
Back view
Separate the 2 different types of castors:
2 locking castors (EF) and 2 regular
castors (EG).
To tighten casters insert the Pin (#11)
into one of the Regular Castors (EF), as
shown in image B.
Attach the regular castor (EG) to the
front of the bottom shelf (EE), and use
the Pin (#11) to secure and tighten.
Repeat for remaining 3 castors
(EF & EG).
NOTE:
Regular castors (EG) need to
be assembled to the front of
the bottom shelf (EE), and
locking castors (EF) need to be
assembled to the back of the
bottom shelf (EE), as shown in
image A.
Ensure that the locking castors (EF) are
firmly locked in the “ON” position before
continuing.
Assemble the left side panel (EA) and
the right side panel (EB), to the bottom
shelf (EE).
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
8
8
7
7
6
6
6
YOU WILL NEED:
YOU WILL NEED:
2
6
11
3
7
4
8
Upside down view
Front view
X 6
X 4
X 1
X 6
X 4
X 6
X 4
YOU WILL NEED:
1
3
4
EG
11
EG
EF
EF
Close up
EE
EE
EA
EB
EA
EB
CG
A
B
At
tach the front brace (CG) to the left
and right cart side panels (EA & EB).
The top of the front brace (CG) can be
identified by two clips located on the top
left, and right side of this
part.
TIP:
One person should align the left
side, while the second person
assembles the right side.
2
Assemble the Heat Shield (CK) to the left
and right side panel (EA & EB).
Back view
CK
EA
EB
8
7
69
X 4
YOU WILL NEED:
