English - 4
SERVICE SAFETY
•
Keep all connections and fittings
clean. Inspect propane cylinder and
propane connections for damage
before attaching.
•
During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
CAUTION
■
Open the stove
lid, rotate the
wind guard
holder inside the
stove lid toward
outside. (Fig. 4)
■
Insert the wind
guard holder
into the slot on
the wind guard.
(Fig. 5) Repeat
on the other
side.
■
The wind guards can be opened and
used as side tables. (Fig. 6)
■
Open oven door and insert the oven
heat diffuser in the lowest support
position. Make sure it is inserted
completely. (Fig. 8)
NOTE:
The oven heat diffuser is
recommended to help distribute heat
evenly and keep the burner clean.
■
Insert the oven rack. (Fig. 9)
NOTE
: The height of the oven rack
may be adjusted to accommodate the
size of the food dish. You may insert
the oven rack at different heights.
Also, the oven rack may be flipped
for additional height adjustments. To
accommodate a large food dish, the
crumb tray may be removed and the
oven rack placed in the lowest
support position.
■
Install the grate as shown. (Fig. 7)
■
Push in and turn right to close the
control knob. Make sure all 3 control
knobs are in closed position. (Fig. 10,
11, 12)
NOTE:
Do not put heavy objects on the
wind guards in case of destroying it when
using as side tables.
■
Repeat the above steps to install the
side handles. (Fig. 3)
To Install Wind Guards
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 3
Fig. 10
Fig. 11
Fig. 12
Slot
