Coleman 36 LM, Руководство по установке

Страница: 10 / 13

9
If you install a decorative gas appliance (vented gas log), the
decorative gas appliance must comply with the
Standard for
Decorative Gas Appliances for Installation in solid fuel
burning Fireplaces, ANS Z21.60-1996, Z21.84 or RGA 2-72
,
and shall also be installed in accordance with the National
Fuel Gas code, ANS Z223.1-1996.
FIRESTOP SPACERS: (FS-8DM)
Firestop spacers are required at each point where the chimney
penetrates a floor space. Their purpose is to establish and
maintain the required clearance between the chimney and the
combustible materials.
When the pipe passes through a framed opening into a living
space above, the firestop must be placed onto the ceiling from
below as shown in figure 22.
DAMPER OPERATION:
The damper handle to open and close the damper blade is
located inside the firebox at the center towards the back wall.
Pushing the handle back in the keyway slot will free the
damper blade to automatically open. To close, reach in and
push the handle back into the keyhole slot then pull down and
forward to lock it in place (see figure 23).
FOR FURTHER OPERATING GUIDELINES,
INSTRUCTIONS AND WARRANTY INFORMATION
PLEASE REFER TO YOUR HOMEOWNERS GUIDE OR
CONTACT YOUR AUTHORIZED DEALER.
TECHNICAL SERVICE
You may have further questions about installation, operations,
or troubleshooting. If so, contact The Technical Service
Department at 1-888-427-8322. When calling, have the model
number of the fireplace ready.
Figure 22
Figure 23
WARNING : Risk of fire! Replace grate with DESA
model 36L GR or 36R GR grate only. This grate has
been designed to keep the operation of your fireplace safe
and efficient.
WARNING: If the fireplace has been used for wood
burning, the firebox and chimney must be cleaned of soot,
creosote and ashes by a qualified chimney cleaner. Creosote
will ignite if highly heated.
WARNING: WHEN USING A DECORATIVE VENTED
GAS LOG, THE DAMPER MUST BE REMOVED OR
PERMANENTLY LOCKED IN THE FULLY OPENED
POSITION.