MODEL 2000015111
3
• Verify the clips along the edges of the tent are properly
attached to the frame poles. (Fig. 8)
• Insert the tips of ridge pole into pockets. (Fig. 9)
Clip
Ridge
Pole
Pole
Fig. 8
Fig. 9
Verify Connections
between Tent and
Frame Poles
Fig. 6
Ridge Pole
STITCH LINE
tEnt sEtup instructiOns
(continued on other side)
1
Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
• Secure with
all
stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of tent
into the wind.
• Do not drop tent.
• Do not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
CAUTION:
Avoid pinch points when opening and closing the
tent frame.
Extend the Tent Frame
2
• Attach the clips on the roof of the tent to the ridge pole.
(Fig. 6)
• Extend each of the telescoping leg poles until they snap
into place. The tent will raise as the leg poles are extended.
(Fig. 7)
Raise the Tent
Fig. 7
Lock
Button
Ridge Pole
Roof pole
Roof pole
• Stand the tent upright with the hub assembly at the
bottom. (Fig. 1)
• Unfold the arms of the tent downward until they lay flat on
the ground. (Fig. 2)
• Rotate the ridge pole to form a corss with the roof pole.
(Fig. 3)
• Unfold the ridge pole. (Fig. 4 and 5)
Fig. 1
Fig. 3
Fig. 4
Fig. 5
Fig. 2
Ridge
Pole
Hub
