Coleman Powersports RB100 2021, Руководство пользователя

Страница: 30 / 38

26
Storage
If the Mini Bike is left unused for an
extended period of time proper stor-
age maintenance is required.
1. Wash Mini Bike thoroughly, then
wax painted parts with a non abrasive
auto wax. Coat vinyl seat and rubber
parts with a vinyl/rubber protectant.
Note: Keep water away from air
intake and muffler outlet while wash-
ing to avoid water from entering the
engine and/or components.
2. Drain carburetor by placing fuel
valve (1) to the off (horizontal) posi-
tion and opening the drain screw
(2). Allow all fuel to drain from the
carburetor. Once fuel is drained, re-
tighten drain screw (2). Note: Make
sure to drain fuel in a proper storage
container.
3. Fill fuel tank to full with gasoline
mixed with fuel stabilizer as
recommended by the fuel stabilizer
manufacture. Note: Fuel stabilizer
can be purchased at most motorcycle
shops and auto parts stores.
4. Remove spark plug and poor 1
tablespoon of motor oil in the spark
plug hole. Re-install spark plug.
5. Place the starter button to the off
position and pull the start recoil cord
1
Returning to service
1. Wash Mini Bike thoroughly.
Note: Keep water away fromair
intake and muffler outlet while
washing to avoid water from
a few times. This is to coat the inside entering the engineand/or
cylinder head with oil.
components.
2. Drain engine oil and replace
with fresh clean oil as listed in this
manual.
6. Fill tires with correct air pressure.
7. If possible, store Mini Bike in a
shed or garage with a cover to protect
from dust, dirt and humidity. If the
Mini Bike must be stored outdoors,
cover completely with a good water-
proof cover.
3. Review this owner’s manual
and follow the pre-ride inspection
procedures.
4. Star engine by following the
starting procedures in this manual.
2