Coleman Powersports RB100 2021, Руководство пользователя

Страница: 23 / 38

19
Spark Plug
MAINTENANCE
This Mini Bike comes equipped with
a CHDY-E6TC spark plug.
To inspect the spark plug, remove
the air filter cover and element to
gain access. Remove spark plug
cap (1) then remove the spark plug
from the engine with the spark plug
tool provided.
Inspect the plug for carbon depos-
its and clean if necessary. If plug
shows excessive carbon, replace the
plug.
CHDY-E6TC
Use a thickness feeler to inspect the
spark plug gap (2). The spark plug
gap should be 0.6 - 0.8mm (0.024
-0.032 in.)
Re-install the inspected plug or new
plug until finger tight. Finish
tightening plug with a wrench. If the
plug is a new plug, tighten
approximately 1/2 turn more with
the wrench. If plug is an old plug,
tighten approximately 1/8 turn more
with a wrench.
CAUTION
Dirt can damage the engine if it
enters the spark plug hole.
Make sure the spark plug hole
is covered after removing plug.
0.6 - 0.8 mm
(0.024 - 0.032
2
1