Coleman Powersports AT125UT Скачать руководство пользователя страница 10

Страница: 10 / 78

Never permit anyone other than an adult to start the ATV.

Drain gasoline from the fuel tank and carburetor prior to transporting the ATV.

Caution the child and others near the vehicle not to get close to or touch any moving parts or any heated areas
such as the engine and exhaust pipe.

Never let your child operate an ATV without close adult supervision (a child under 10 should not operate this
ATV even with adult supervision).

Promptly correct your child if he or she begins to ride beyond his or her abilities and, if necessary, intervene by
pulling the cord (lanyard) to stop the engine.

If the child rides beyond his or her abilities, or rides in terrain that is t

oo diffi

cult, he or she may lose control of

the ATV, causing an accident.

Introduce new riding situations slowly and make sure the riding areas do not exceed your child’s skill level.

SAFETY INFORMATION (continued)

Содержание AT125UT















































































Результаты поиска

Содержание AT125UT

Отзывы:

Похожие инструкции для AT125UT

Бренды по названию

Популярные бренды

Coleman Powersports AT125UT, Руководство пользователя

Результаты поиска

Содержание AT125UT

Отзывы:

Похожие инструкции для AT125UT

Бренды по названию

Популярные бренды