2.
SYMBOLS AND USING THIS INSTRUCTION MANUAL
2.1. Throughout this Instruction manual the following symbols are shown to identify
conditions which pose a hazard to the user, or to identify actions that should be
observed. These symbols are also shown on the product, or its packaging. When a
symbol is shown next to a paragraph or statement it is recommended the user takes
particular note of that instruction in order to prevent damage to the equipment or to
prevent injury to one’s self or other people.
The Responsible Body and the Operator should read and be familiar with this
Instruction manual in order to preserve the protection afforded by the
equipment.
To prevent injury or equipment damage it is the manufacturer’s
recommendation that all persons using this equipment are suitably trained
before use.
2.2. Symbols Defined.
4
Page 4 of 24
M7748 Issue 3.2
2. SYMBOLS AND USING THIS INSTRUCTION BOOK.
2.1. Throughout this Instruction book the following symbols are shown
to identify conditions which pose a hazard to the user or to identify actions that
should be observed. These symbols are also shown on the product, or its
packaging. When a symbol is shown next to a paragraph or statement it is
recommended the user takes particular note of that instruction in order to prevent
damage to the equipment or to prevent injury to one’s self or other people.
The Responsible Body and the Operator should read and be familiar with this
Instruction book in order preserve the protection afforded by the equipment.
To prevent injury or equipment damage it is the manufacturer’s
recommendation that all persons using this equipment are suitably trained
before use.
2.2. Symbols defined.
Caution, risk of danger. See note
or adjacent symbol.
This symbol denotes this section of
the fascia is designated for the
control of the heating function.
Protective conductor terminal to
be earthed.
(Do not loosen or
disconnect).
This symbol denotes this section of
the fascia is designated for the
control of the stirring function.
Caution / risk of electric shock
This On / Off symbol means the
LED is indicating the presence of
mains electricity.
Recyclable Packing Material
This symbol denotes the control
knob is used to set the temperature.
Do not dispose of product in
normal domestic waste.
This symbol adjacent to an LED
indicates when a function is in
operation.
Caution. Hot surface.
This symbol adjacent to an LED
means the control functions are
being set or the serial
communication is in operation.
Reverse stir function.
This symbol denotes the control
knob is used to set the ‘Ramp
Rate’.
This symbol above a control knob
denotes that a value is increased
as the knob is rotated clockwise.
This symbol indicates the plug
position of data transfer.
Refer to Instruction book.
Bio Chemical Hazard. Caution
required. Will require
decontamination.
