Cole Parmer Omega Zen, Руководство оператора

Страница: 8 / 12

8
WARNING!!
- Before cleaning, disconnect the pipette controller from the power supply.
Never clean the power supply or immerse the unit in water.
-Never use with highly flammable or corrosive liquids.
-Never use or recharge in an explosive atmosphere.
- Ensure the current of your electrical source matches the voltage of the charger
unit. Only use the power supply supplied with the unit.
- When changing the filter, wear protective gloves to prevent accidental
contamination.
-Do not open the pipette controller housing as it will void the warranty.
-Never operate the pipette controller without a filter.
Troubleshooting
Problem Possible Cause Remedy
Slow aspiration Filter blocked Replace filter
Slow aspiration Battery low Recharge battery
Pipette drips Pipette not secure in holder Re-insert pipette into unit
Pipette drips Pipette adapter damaged or worn Replace pipette adapter
Note: There are no user-serviceable parts inside of the unit.
Product and Parts Ordering Information
Part No. Description
25300-96 Pipette controller, blue
25300-98 Pipette controller, gray
25303-34 Charging desk stand for pipette controller
25303-35 Standard wall mount for pipette controller
25303-36 Magnetic wall mount for pipette controller
25303-37 Filters (0.2 μm), sterile, 10/pk
25303-38 Filters (0.2 μm), non-sterile, 10/pk
25303-39 Filters (0.45 μm), sterile, 10/pk
25303-51 Filters (0.45 μm), non-sterile, 10/pk
25303-52 Power supply
25303-53 Lithium-ion battery
25303-54 Nosepiece for pipette controller
25303-55 Pipette adapter