background image

3

General Description

The Wax Dispenser is designed for on-demand delivery of molten wax. The novel design of the instrument ensures
that it takes up a minimum bench space in the laboratory, whilst still maintaining a large 7.5L capacity tank, for
melting up to 6kg of pelletized wax at a time. The Wax Dispenser has digital temperature control which provides
accurate temperature control of the molten wax, and is coupled with an ultra fast heating system for rapid melting
of pelletized wax. Delivery of molten wax is via a non-drip lever tap, which is heated via a dedicated heating
system, which prevents blockages resulting from solidified wax and ensures an even flow of wax. The inner tank has
a filter screen (0.5mm mesh) fitted to prevent coarse particles from blocking the delivery tap. The tank is also fully
insulated to prevent heat loss from the tank and to ensure that the outer surfaces of the tank are safe to touch.

Important Safety Advice

This product is designed for laboratory use only. Always follow good laboratory practice.
Users should be aware of the following safety advice:

v

 

DO NOT

 use without appropriate training.

v

 

SHOCK HAZARDS OR UNSAFE PRACTICES ARE DANGEROUS

 as they can cause severe personal injury, fire  

 

or death.

v

 

DO NOT

 use combustible substances near hot objects.

v

 

DO NOT

 use the equipment in hazardous atmospheres.

v

 

DO NOT

 immerse the equipment in water.

v

 

DO NOT

 operate or handle any part of the product with wet hands or use on surfaces that may become flooded.

v

 

NEVER

 move the product while still connected to the power supply.

v

 

HIGH TEMPERATURES ARE DANGEROUS

 as they can cause serious burns to operators and ignite combustible 

 material.

v

 

USE CARE AND WEAR PROTECTIVE GLOVES TO PROTECT HANDS

.

v

 

NEVER

 lift or carry the instrument during operation.

v

 

NEVER

 use the tap to lift or carry the instrument.

DO NOT

 position the unit so that it is difficult to disconnect from the mains supply using the mains plug.

The mains outlet socket used should be located close to the equipment and readily identifiable and accessible

 

to users.

v

 

DO NOT

 leave equipment switched on and it is not recommended to leave any heating apparatus unattended 

 

during operation.

v

  The unit should be carried using both hands.

v

 

DO NOT

 allow molten wax to accumulate on the surface of the equipment.

v

 

DO NOT

 use if the equipment is empty

v

 

DO NOT

 operate the tap while the wax is cold as this may damage the tap.

Symbols Defined

WARNING

EARTH

BIOHAZARD

RISK OF

ELECTRIC SHOCK

HOT

SURFACE

Содержание MH8524













Отзывы: