Cold Jet AERO 2 PCS 60, Руководство оператора

Страница: 24 / 32

41
Maintenance
WARNING Prior to any maintenance or inspection procedures, ensure that the PCS 60
is powered down and the power source is disconnected. Ensure that the air
supply is closed, bled off, and the air supply hose is disconnected from the
PCS 60.
Daily
y
Inspect the hopper area for any dirt or debris.
y
Inspect the air and blast hoses for damage such as cuts or kinks.
y
Inspect power connections for cuts, or worn surfaces. Repair or replace as necessary.
y
Inspect fittings on the applicator for loose or improper connections and correct as necessary.
y
Inspect applicator blast cable for wear or improper connections and correct as necessary.
y
Inspect the applicator for any damage or loose parts and correct as necessary.
Weekly
y
Inspect the inside of the hopper for dirt and inspect rotors for cracks, gouges, or broken
surfaces.
y
Verify the nozzle airflow exit end is not deformed or burred.