manualshive.com logo in svg

Colby Instruments PDL-100A, Руководство по эксплуатации и программированию

Поделиться
Скачать
Colby Instruments PDL-100A Скачать руководство пользователя страница 34

Chapter 4                                                                             

Setting Delay Values 

© 2010 Colby Instruments.  PDL-100A Operating and Programming Manual                     Page 25 

 

4.6.0 Communicating with the PDL-100A over Ethernet TCP/IP.  

 

TCP/IP Protocol using Winsock sends data packets to individual IP addresses 
over a unique and pre-specified port.  The PDL-100A supports fixed (static) and 
dynamic IP addresses and the Winsock interface.  Network Addresses including 
IP address, Gateway IP, Netmask, DHCP, and Port Number can be specified or 
changed by sending commands to the PDL-100A using the GPIB, TCP/IP, or RS-
232 interfaces.   
 
To change the network addresses using a command interface, 

see Section 5.0 

Command Commands for NET, NET? and NETM? Commands. 

 
To change the network addresses using the MT-100A Microterminal, 

see Section 

4.3.4 SETUP Menu – Network Addresses.  

 

 

4.6.1 Default Network Addresses 

 

IP Address 

192.168.100.8 

Gateway Address 

192.168.100.1 

Netmask 

255.255.0.0 

DHCP 

OFF 

Port Number 

1234 

 

These are the default network addresses at time of manufacture and are stored 
internally in non-volatile storage.  If you are unable to communicate with the 
PDL-100A over Ethernet after changing a network address (no MT-100A 
Microterminal or GPIB communication available) and want to restore the default 
address settings, set the GPIB address switches to Zero (all OFF) and power-cycle 
(turn OFF then ON) the PDL-100A System Unit.  The default address will take 
effect.     
 

4.6.1.1 Programming over the Ethernet TCP/IP 

 
When programming the instrument over the Ethernet TCP/IP interface, 
characters are 

NOT

 echoed (sent from the PDL-100A) back to the PC 

when sending the command string.  For example, from your application 
program if you send the character string:  
 

*IDN?<CR><LF>

  

 
the PDL-100A will respond with:  

Colby Instruments.PDL-100A-625.0PS-
05111020.V1.10<CR><LF> 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PDL-100A











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды