manualshive.com logo in svg

Colasit CMVpro 125, Руководство по эксплуатации, Страница: 33 / 76

Поделиться
Скачать
Colasit CMVpro 125 Скачать руководство пользователя страница 33

Mechanical installation | 6

Operating instructions CMVpro 125-400 | Version 1-en

33 / 76

6.5

Foundation mounting

Conditions:

• Installation location require-

ments 

_

 Chap. 6.2 [

}

 30].

• Fastening elements

present.

Fig. 23: 

Fastening recommendation for floor mounting

1. Transfer fan support hole pattern to the foundation (baseplate).

Hole pattern dimensioning according to technical data sheet.

2. Install anchoring elements (anchors) according to supplier’s instructions.

3. Fix vibration absorbers to anchoring elements.

4. Set fan on vibration absorbers and fasten tightly.

6.6

Wall mounting

DANGER

 Risk of injury due to fan falling over

Injuries by pinching and crushing of body parts.

▪ Never mount fan support vertically on the wall!

u

Only mount fan with wall bracket 

_

 Chap. 4.3.9 [

}

 25].

u

Tightly screw in and secure all screw connections.

Conditions:

• Installation location require-

ments 

_

 Chap. 6.2 [

}

 30].

• Wall bracket shall be de-

signed for four times the fan
weight.

• Fastening elements

present.

Fig. 24: 

Fastening recommendation for wall mounting

Содержание CMVpro 125













































































Отзывы:

Нет отзывов