COLASIT AG
Plastic construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
Editione 2010 / Subject of alteration
Copyright by COLASIT AG Spiez
Page 14
Deposits on the impeller and soiling lead to imbalance and as a result to
vibrations with undesirable side effects.
If vibration occurs, switch the fan off immediately.
Contamination and encrustations should be removed with a soft tool without damaging the surface (e.g. with
a wooden spatula or scraper).If possible, use water and a household cleaning agent.
Solvents can corrode the material. These may only be used with the written
consent of COLASIT.
To carry out cleaning work, we recommend the production of a process instruction.
8
Spare parts
Please identify components by means of the item and drawing numbers as well as the order number and
model designation.
Use only original spare parts. Our warranty is void if other or unapproved components are used.
Please address your spare parts order to our customer service department
9 Operating
instructions
For the operation of the fan, we recommend the preparation of process instructions documentation. Such
documents simplify repetitive workflows, reduce the risk of incorrect operation and are a valuable aid when
personnel changes occur and for training.
If the fan must be qualified, process instruction documents are required.
You will find important notes on the preparation of process instructions in various chapters of the operating
manual.
To help ensure the safe operation of the fan, COLASIT offers, as a service, the
review of process instruction documents prepared by the operator.
10 Log-book
For your own safety and as a contribution to personal responsibility, we recommend the keeping of a log
book for the entire operation in which the fan is in use.
All events should be registered in the log book.
In the case of damage and also in the case of an accident, this document is the first source of
information.
Please register the following together with, for example, date and signature:
-
beginning and end of a work cycle
-
special occurrences, even it these do not concern the fan itself (e.g. power failure, alarm)
-
change of persons responsible for monitoring (e.g. in the case of shift operation)
-
repairs carried out and spare parts installed
- decommissioning
- special
instructions
- etc.
11 Disposal
Before disposing of plastics and other components, (complete or as broken parts), please clean them as
necessary to preclude any danger to the environment.
Dispose of the components correctly. Instruct a waste-management company to do this or return them to us
for disposal.