Coitech TBK050-M10X, Оригинальное руководство пользователя

Страница: 4 / 28

4
EN
GL
IS
H
• The heater becomes very hot during use and will remain so for a while, even after
being switched off. The heater should therefore never be touched until it has
cooled sufficiently.
• The heater should be treated with care; it should not be subjected to impacts
and vibrations.
• The heater must only be connected to an earthed electrical socket.
• If the heater is damaged it should be replaced by a qualified service technician.
• If the mains lead is damaged it must only be replaced by the manufacturer,
retailer or other qualified service technician.
• The heater may be used by persons with reduced physical, sensory or mental
capability, lack of experience or knowledge which could jeopardise their safety,
provided they have been given supervision or instruction concerning the safe use
of the product and understand the hazards involved.
• The heater is only intended for domestic use. It must not be used on building sites,
in greenhouses, barns or stables containing combustible dust.
• The heater becomes very hot during use. Pull out the plug and let the heater cool
before cleaning.
• The heater should be plugged into an electrical socket which is visible and easy
to access.
• Always unplug the heater when it is not in use.
• The heater is only designed for normal indoor use (IP24) and must not be used outdoors.
• Never turn the heater off by unplugging it. Always turn the heater off by setting
the on/off switch to the off position.
• Ensure that no foreign objects enter the heater as this may lead to short circuiting,
electric shock, or a fire hazard.
• Never position the heater in such a way that the mains lead is directly in front of or
touching the housing of the heater.
• The heater must only be connected to an earthed electrical socket with a power
supply of 220–240 V AC.
• Only use the heater as described in the instruction manual. Do not use the heater
for any purpose other than that for which it was intended or modify it in any way.
• Make sure the heater is clean and is not covered with dust or residue.
• The heater can either be used with the included feet fitted, standing on a hard flat
level surface or mounted on a wall using the included wall bracket.
• For extra safety, all electrical products connected to the mains should be run
through an RCD for personal safety. The RCD should be rated to trip at 30 mA.
Storage
Store the heater in its box in a cool and dry location, together with its instruction manual.