7
EN
G
LI
SH
Instructions for use
1. Place the radiator on a flat and horizontal surface at least 1 m away from
the closest wall or combustible material.
2. Plug the radiator into an electrical socket, push the On-Off switch (1) and press
(9) to switch the radiator on.
3. The factory default setting is power level ll (1200 W) and an ambient temperature
of 25 °C.
4. If you like, you can alter these settings using the controls mentioned in the
Product
description
section above.
Timer
1. Quick-press
.
2. The symbol and the number “0” will then begin to flash on the display.
3. Press [ −/+ ] to set the number of hours you wish the radiator to remain on for
before the timer shuts it off.
4. The set number of hours and the symbol will flash for a few seconds. The timer
symbol will then show on the display to indicate that the timer is activated.
5. If you wish to switch the timer off, press
again and set the hours to “0”.
Button lock
• Activation: Hold in
until the symbol for the button lock is shown on the display.
• Deactivation: Hold the button in again to deactivate the button lock.
Overheating protection
• The radiator will turn off automatically if it becomes overheated.
• If the overheating safety cut-off switch is triggered: unplug the radiator from
the wall socket and let it cool for 30 minutes.
• Check that the radiator is not damaged in any way. Remove any items which may
have been covering the radiator.
• The overheating safety cut-off switch resets itself once the radiator has
cooled down.
Tip-over switch
The radiator has a built-in tip-over switch that switches the radiator off if it is tilted too
far or falls over. The tip-over switch resets when the radiator is stood upright again.
