INSPECT PACKAGE CONTENTS
All CA-286 modules are carefully packed for shipment to insure a safe arrival.
However, if there is any damage, contact Coil Audio immediately and keep any and
all shipping materials for use during any possible damage claims with the shipper.
Included in the Package are:
(1) CA-286 module
(1) 1 -3 input/output transformers depending on order
(1) Guide Bracket hardware set for PS-6 Tray that includes:
-(4) GUIDE BRACKET plates (two short/two long)
-(4) 3/8" #6-32 Stainless Steel Screws w/Lock-Nuts
-(2) Fender Washers
-(2) Module Thumbscrews
GUIDE BRACKETS MUST BE INSTALLED BEFORE INSTALLING MODULES IN
THE RACK TRAY
CHANGING TRANSFORMERS
Before inserting modules into the rack tray, make
sure both your input and output transformers are
firmly seated into the module body. Never plug or
unplug transformers while the module is plugged in
and powered on.
Each octal plug has a guide pin to ensure proper
orientation, refer to the adjacent picture for
placement. The front octal socket is for the input
transformer (such as CT-110 or CT-100HN). The rear
octal is for the output transformer (CT-41).
2
For guide bracket and module installation please see P a g e s 3 - 4 o f the "PS6 Rack
and Power Installation and Operating Manual"
