
6X-1090K
10
1.7 3120
HD
/3720
HD
Interconnection Diagram
Figures 6, 7 and 8 show interconnection diagrams for the 3120
HD
and 3720
HD
series camera systems:
•
Figure 6 shows a setup of the camera system using IP output.
•
Figure 7 shows a setup of the camera system with PoE-enabled switch.
•
Figure 8 shows a setup of the camera system using the PoE injector with non-PoE switch.
NOTE
: If your PC has a GigE network interface, you can bypass the switch and plug the camera system
RJ45 cable directly into the GigE port on your computer.
These diagrams represent typical installations. Each installation site will have its own unique requirements.
Figure 6. Interconnection Diagram, IP Output, 24 Vac
Network
Switch
Router/Switch
CAT5e
Cable
Router/Switch
WAN
LAN
System Cable
Default IP Address
192.168.2.150
Earth
Ground
Cable Shield(s)
Power
24 Vac ± 10%
@ 3 A min
Properly secure the camera system
before the power is applied.