5
WARNING:
High voltage flashes should NOT be connected to the sequencer or any of its associated
adapters/connectors/cables. Doing so could expose you to dangerously high voltages resulting in
serious injury or death. All new flashes on the market do not expose high voltage on the hot-shoe.
These are the flashes intended for use with the sequencer. Please visit our web-site at
http://www.cognisys-inc.com
for a list of low-voltage flashes, or contact us via e-mail at:
.
CAUTION:
Do not use “Y” adapters for the trigger outputs to connect more than three devices.
Some devices generate significant transients (like solenoids) that may damage sensitive equipment such
as cameras and flashes. The sequencer is protected from these transients but other electronics (such as
flashes and cameras) may not be. It is acceptable to use a “Y” adapter to connect more than one device
to a trigger output as long as the devices are similar. If you have any questions or concerns about device
compatibility, please contact us at:
.
