3
1.
Safety Instructions
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Follow all CAUTION notices to reduce the risk of personal injury, prevent damage to the
StopShot module, accessories, and devices (cameras, flashes, etc). Failure to follow all CAUTION
notices may void your warranty. CAUTION may also indicate a potentially hazardous situation
which, if not avoided, may result in personal injury.
The safety alert symbol
precedes a general CAUTION or WARNING statement.
The electrical hazard symbol
precedes an electric shock hazard CAUTION or WARNING
statement.
2.
Getting Started
2.1
Package contents
The latest version of this manual is available at
http://www.cognisys-inc.com
.
Your Flash Sequencer package contains the following:
1.
Flash Sequencer Module (1)
2.
6 ft - 3.5mm M/M Cable
3.
(2) - 6 ft – RCA M/M Cable
4.
PC→RCA Cable
You will need one PC→RCA cable and one 6 ft RCA cable for each flash that you intend to use with the
sequencer.
2.2
Connections
To connect the flash sequencer to StopShot use the included 3.5mm cable and connect one end to the
jack labeled “Sensor” on StopShot and the other end of the cable to the “StopShot” jack on the
sequencer. Sensors traditionally inserted into StopShot will now be plugged into the sequencer. This
allows the sequencer to draw power from StopShot.
