22 Xpand 25 Quick Reference Guide
Xpand 25 Quick Reference Guide 23
4
Tighten in sequence.
M5 Torque limit: 40
N-cm (3.5 Lb-in).
M8 Torque limit: 90
N-cm (8 Lb-in)
Mounting Bar Lights
1
Mounting Instructions (continued)
Put the two screws through
their respective holes of the
flange and loosely tighten the
M5 T-nuts on the other side.
2
Slide in the marked nut into the channel of the barlight
from both sides.
With an M8 screw, fit the bunny ear to the hole of the FOVE bracket you
would like to use.
Attach the base plates of the DMA-FOVBKT-025 to the XPand 25
bracket, aligning the middle hole over the spacer that was inserted in
Step 1 and then fastening with the two 8 mm bolts provided.
4
5
5
