Connecting a DataMan 8600 Through USB
1. Connect the serial slide-in (DMCM-SERIALM-00) to your DataMan 8600.
2. With a 2.5 mm Allen wrench, tighten the screws so that the slide-in is firmly locked.
3. Insert the plug, slide the cable lock up to the reader and twist the cable lock in place.
Use the DM8500-USB-00 cable (2.5 meters) or the DM8500-USBC-02 cable (2.5 meters).
Note
: Disconnect the DataMan 8600 reader from power before inserting/removing the communication modules.
Using Your Device Through USB
If you connect your reader with the coiled USB cable, you must use your device in USB 1.1 mode. With a straight USB
cable, you can use your device in both modes.
19
Connection Options
