Cognex DataMan 475 Скачать руководство пользователя страница 25

Страница: 25 / 55

When a data checking failure occurs, a message indicates the cause of the failure. For example, if a check digit is

incorrect, a message indicates the expected check digit value. When an error is detected, it is reported and the parsing is

stopped.

The image shows the Data Matrix with encoding information along with a depiction of the symbol to the right showing

each module.

When the cursor is placed over the codewords reported in the Data Matrix Codeword table, the eight modules of that

codeword are highlighted within the image depiction to show where the data is encoded within a data matrix symbol.

Quality Detail Tab

The

Quality Detail

tab shows the measured quality parameters and lists the formal grade. Different symbologies and

quality grading standards display pertinent data here.

For example, the image shows the characteristics of a 2D Data Matrix code graded according to ISO 15415:

The image shows the characteristics of a 1D UPC-A symbol graded according to ISO 15416:

Examining the Results

Содержание DataMan 475























































Результаты поиска

Содержание DataMan 475

Отзывы:

Cognex DataMan 475, Справочное руководство, Страница: 25 / 55

Результаты поиска

Содержание DataMan 475

Отзывы: