30 DataMan 300 Quick Reference Guide
DataMan 300 Quick Reference Guide 31
Installing a Filter (Flat-Front Cover - Continued)
5.
Snap fit the filter retaining clip onto the legs of the filter holder.
Ensure that the laser modules slide into the laser guides and the orientation
pin fits into the filter retaining clip.
Check that the snap hooks are correctly positioned and fully engaged.
Laser guides
Orientation pin
Laser modules
6.
Insert the PCB with the filter retaining clip and the filter holder back
into the front cover.
Ensure that the hole in the PCB meets the orientation pin in the front
cover.
Fix the PCB with two Torx 6 screws of size 2.0x5 mm.
Use a torque
of 8-10Ncm
(11-14 oz-in).
Orientation pin
LED cover
Notch
in PCB
PCB with filter
holder and filter
retaining clip
