COFFEtek VITRO S2 Series, Техническое руководство, Страница: 28 / 71

VITRO S2/3 Revision 1 28/02/2017 28
30. For example, to save a configuration to a card,

Press ENTER on the USB ACTIVITIES menu. The display will show,
SELECT ACTION:
SAVE M/C CONFIG

Press ENTER again and the user will be asked whether to save to the default file.
(See below for the procedure for inputting a custom filename). The display will
show,
DEFAULT FILE?
YES

Press ENTER to confirm. If the file already exists the display will show,
FILE EXISTS
OVERWRITE?

Press ESCAPE to cancel or press ENTER to confirm that you wish to overwrite the
existing file.

If ENTER is pressed during the file writing process the display will show,
PLEASE WAIT

Once the file has been successfully written the display will show,
MACHINE CONFIG
WRITTEN OK

If a USB stick is not detected on entering the USB activities menu the display will
show,
PLEASE INSERT
USB STORAGE DEV’

PLEASE NOTE: Do not remove the USB stick during the file writing process.
31. For a custom filename select NO when the display is on the default file screen. The display
will then show…
FILE :-
4567890 ABCDEFGH (F
LASHING
D
IGIT
)

The filename can be up to 8 chars and directl
y above the flashing ‘A’ char is the first
character of the filename which defaults to a space.

Use the

(LEFT)

(RIGHT) to scroll through the permitted chars on the bottom
line. You can hold the key down to scroll faster or a single touch will scroll by a
single character.

Pressing the * (STAR) key on the internal keypad will place the character
highlighted by the cursor in the filename at the current position. The display will
show…
FILE :- A
34567890 ABCDEFG (F
LASHING
D
IGIT
)