COFFEtek NEVA 4, Техническое руководство

Страница: 30 / 40

COFFE tek LTD
NEVA 4 Issue 1 22/02/08 30
CONNECTING THE ELECTRICAL SERVICES
WARNINGS
(1) THE MACHINE MAINS CABLE MUST BE CONNECTED TO THE SUPPLY
VIA A SAFETY ISOLATOR SWITCH WHICH PROVIDES A CONTACT
SEPARATION OF AT LEAST 3mm.
(2) REPLACEMENT OF THE Y TYPE MAINS CABLE REQUIRES SPECIAL
TOOLS. SHOULD THE CABLE BECOME DAMAGED, REPLACEMENT
MUST ONLY BE CARRIED OUT BY A TRAINED PERSON FROM AN
APPROVED SERVICE AGENT.
(3) ENSURE THAT THE SUPPLY TO THE ISOLATOR SWITCH IS ISOLATED
BEFORE MAKING ANY CONNECTIONS TO IT.
(4) ENSURE THAT THE SUPPLY TO THE BEVERAGE MACHINE IS
ISOLATED BEFORE MAKING ANY CONNECTIONS TO THE TERMINAL
BLOCK AT THE REAR OF THE MACHINE.
(5) THE BEVERAGE MACHINE MUST BE EARTHED.
12.
The beverage machine is fitted with a domestic 3 pin plug for connection to a standard
13A supply, alternatively, the beverage machine may be connected via a safety isolator
switch with a contact separation of at least 3mm, to a 230V, 50Hz, 13A supply. Note that
replacement of the Y Type mains cable requires special tools. Should the cable become
damaged, replacement must only be carried out by a trained person from an approved
service agent.
To reconfigure the machine to operate from a 110V supply, move the voltage selector
link on the PSU to the 110V position and replace the 240V 3kW element (part no.
12345) with a 110V 1.6kW element (part no. 56223).
13. Preferably, the isolator switch should be located behind the machine to prevent
accidental damage or misuse.