Neo Fitting Guide -
Distance Selection
Guide part number: 81066730
11. There are 4 fixing nuts locations
marked once you have removed them
the selection board will lift off the studs,
take care not to lose the white nylon
spacers that the board sits on.
12. Handle the selection keypad with care,
there are components on the back that can
be damaged if care is not taken, they are
marked by the following image
13. Place the selection keypad on an ESD
protected surface i.e. Pink bubble wrap,
with decals facing you.
14. Carefully remove the black insulating tape
from the front of the decals.
15. Take care when removing insulating tape.
16. Make a note of the decal locations, then
remove from the frame
17. Take the new selection keypad and rebuild
with selection decals and insulating tape to
cover the gaps as shown on previous
sheet.
18. Re-fit the selection keypad with link fitted
to the metal frame
19. Re-fit metal frame with selection keypad to
the machine.
