CHOCOLINO & CAFÉLINO
15
INSTALLATION AND START-UP
Positioning
Place the machine on a flat horizontal surface that will
support the weight of the machine.
Make sure air is able to circulate behind
the machine (minimum 10cm).
Note
Min. 10cm
Water connection and start-up
Connect the supplied water hose to the cold water
connection using a ½’’ R-connection(A). When pushing the
machine into position make sure there is no interference
to the hose to ensure proper water flow.
Water supply to the machine is the customer’s
responsibility according to instruction and advice from the
supplier.
In areas with high level lime problem, a descaling filter
should be mounted.
Open the water tap.
Turn on the power switch(B) inside the door. The water
tank will fill automatically with1.8 litres of water. The
element will not be powered until the water reaches the
level indicator.
The temperature is set to 85º Celsius.
Close the door.
A
B
The new hose set supplied with the appliance shall be used and that old hose sets
shall not be reused. Connection to a closable valve is recommended. Min. water
pressure; 2bar (200kPa). Max. waterpressure; 8bar (800kPa).
Note
Electrical connection
IMPORTANT!
Connect the plug to a separate earthed wall socket.
220-230V 50-60Hz, 10 Amp.
