Coemar SunLite LED Series, Руководство пользователя

Страница: 22 / 25

22
11.3
Periodic controls
Mechanical components
Check the correct working of the mechanical parts and, if needed, replace them. Make sure the projector is not
mechanically damaged. If necessary, replace the worn parts.
Electrical components
Check all electrical connections, in particular for correct grounding and correct attachment of all extractable
connectors. Press the connectors if necessary and reposition as before.
11.4
Fuses
SunLite LED Series has an automatic fuse that in most cases does not need to be replaced.
12
. F.A.Q. and answers
The following list shows common issues that may be simply solved. If issues persist, the unit must be repaired by a
qualified personnel or just contact your Coemar service.
Question Possible solution
SunLite LED Series does
not emit light
Projector not powered on:
• Make sure the power cable is plugged in or test the input
voltage;
Wrong DMX address:
• Check the DMX Address setting and the output signal of
the controller;
SunLite LED Series is not
responding to DMX signal
DMX signal may not reach SunLite LED Series:
• Inspect the cable connection, correct poor connections or
inefficient repair or replace damaged cables;
• Check DMX address of the unit;