30
English
11. Frequently asked questions
10.2. Periodic maintenance
Mechanicals
Check that the units is not mechanically damaged. Regularly clean the glass by using a soft cloth with a specific cleaning liquid and, if
necessary, replace the damaged parts.
Electrical components
Check all electrical components for correct earthing, oxidation and proper attachment of all connectors, cleaning and refastening if nec-
essary.
Problem
Possible solution
Stage Lite Led
won’t turn on.
Mains power is not available to the
Stage Lite Led
:
- Check that the green Led is on, if so check the incoming voltage to the
Stage Lite Led.
- Check the main pcb fuse
and that of the switching powersupply.
Stage Lite Led
doesn’t respond to DMX signal
Incoming DMX may not be being received by the
Stage Lite Led
:
- check that the led indicating DMX input is flashing. If not, check the
DMX console’s output and any cabling for continuity
.
- Check the dip-switch panel to ensure that no functions are selected
which inhibit
DMX control.
- Stage Lite Led
may be incorrectly addressed. Check the DMX
addressing.
The
Stage Lite Led
is set to auto but is not running any
programs
In addtion to setting the AUTO dip-switch to on, it is necessary to also
select
a program number
(see section
8.2 MODE function
).
- Multiple programs have been selected - only one program at a time
may be selected.
- Check that amongst the interconnected fixtures, only one has bee set
to Master.
- Ensure that there is no incoming
DMX
signal (this may cause a con-
flict in signals).