4) Insert the new lamp.
The lamp is manufactured from quartz glass and should be handled with care; always adhere to the instructions supplied in
the lamp’s packaging. Never touch the glass directly, use the tissue provided in the lamp’s packaging. The GY 9,5 lampholder
is asymmetrical in construction, with one lamp pin larger than the other. DO NOT USE UNDUE FORCE. In case of difficulty,
inspect for physical damage and then repeat the installation procedure.
5) Slip the lamp assembly back into its slot and replace the 2 screws (
A
) previously removed.
Attention:
we recommend to run a lamp alignment routine after every lamp replacement, to keep the dichroic filters inside
the fixture from overheating; Refer to chapter 13 of this manual for more detailed instructions.
6
English
