Coemar Ledko EXT FullSpectrum, Инструкция по эксплуатации

Страница: 11 / 30

11 11
4.4 Optical group, framing system and gobos
Follow these steps in order to configure the optical group properly:
1. Remove the two screws “ A ” placed on both sides of the optical holder tube;
2. Gently remove the optical holder tube “ B ” pulling it away from the body;
3. Loose the thumbscrews “ C ” of the two lenses to set them at desired position. Turn on
the fixture and check if the desired focus and zoom lever are correct, then tighten the
thumbscrews;
4.3
Adjusting unit’s tilt
In order to adjust the tilt of the unit simply loose the side screw on the yoke, adjust the tilt
and lock the yoke by tightening the screw again.
A
C
B