8
English
mounting
iSpot 575
may be either floor or ceiling mounted.
For floor mounting installations, the
iSpot 575
is provided with four rubber mounting feet
For ceiling mounted installations we suggest the use of appropriate clamps or fixings to attach the fixture to the mounting sur-
face.
The structure from which the unit is hung should be of sufficient rating to hold the weight of the unit, as should any clamps used
to hang the unit. The structure should also be sufficiently rigid so as not to move or shake whilst the
iSpot 575
moves dur-
ing its operation.
safety chain
We recommend the use of two safety chains (cod. 069) - connected to the
iSpot 575
and to the suspension truss in order
to avoid the fixture accidentally falling. If using an after-market safety chain not manufactured by
coemar
, ensure that it is of
sufficient rating to hold the weight of the unit.
You may attach the safety chain to
iSpot 575
. via the holes in the fixture’s base (
B
)
protection against liquids
The projector contains electric and electronic components that must not come into contact with water, oil, or any other liquid.
movement
The projector has a maximum movement of 630° in the base and 260° in the yoke;
DO NOT
place any obstructions in the
path of the projector’s movement.
safety chain
The use of a safety chain (cod. 069) - fixed to the
iSpot 575
and to the primary suspension point, is highly recommended
to protect against accidental failure, however unlikely, of the primary suspension point.
If using an after-market safety chain not manufactured by
coemar
, ensure that it is of sufficient rating to hold the weight of
the fixture.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The minimum recommended distance from
flammable material is: 0.5m. Minimum distance from the object being illuminated is: 2 m.
345mm
13,58”
293mm
11,54”
6. Installation
www.carlosmendoza.com.mx
