English
24
10.5 Standard color wheel configuration
10.6 How to replace filters
1.
Facing the front side of the wheel, push up the filter to replace inserting your finger through the plate hole, then remove the
filter.
2.
Insert the new filter (facing the coated side downwards) making it slip under the spring until it locks; respect the coated side of
the filter (bottom side)..
NB
:The wheel only accepts glass filters or gobos with a maximum diameter of 40 mm and no more thick than 1 mm.
10.7 Reassembly the groups on the projector
In order to reassembly the two groups in place, just follow backwards the procedure explained at the beginning of this chapter: half
insert the gobo assembly and incline it toward the front of the fixture, Insert the colour changer and then full insert the gobo
assembly. Fix the two groups by their screws, connect the cables and fix them again. Verify that the internal of the body is free from
loose pieces ( washers, screws, etc..) then fix the body cover.
40mm.
CODE
POS. ROSCO STANDARD
N°
VT357
1
026 Bright red
1
VT351
2
022 Dark Amber
1
FC050
3
441 Full CT straw
1
VT359
4
UV405
1
VT353
5
079 Just blue
1
