Coemar Concept Design 384, Руководство пользователя, Страница: 5 / 27

5
Safety:
1. The fixture must always be installed with bolts, clamps, or other fixing devices which are
suitably rated to support the weight of the fixture.
2. Always use a secondary safety fixing device with chain or steel wire of a suitable rating to
sustain the weight of the unit in case of failure of the principal fixing point.
3. The external surfaces of the unit, at various points, may reach 60°C. Never handle the
unit until at least 10 minutes have elapsed since the fixture was turned off.
4.
Never install the fixture in an enclosed area lacking sufficient air flow; the room tempera-
ture must not exceed 35°C.
5.
The projector contains electronic and electrical components which must under no cir-
cumstances be in contact with water, oil or any other liquid. Failure to do so will compro-
mise the proper functioning of the fixture.
2.2
Warranty conditions
1. The fixture is under warranty for 36 months from the purchase date against factory defections.
2.
Damage ought to unskillfulness, inappropriate use, or lack of suggested maintenance are excluded from the
warranty.
3. Warranty expires when the fixture is opened by unauthorized personnel.
4.
Warranty doesn’t include the replacement of the fixture.
5. Serial number and model of the fixture are necessary to retrieve informations and assistance from the
dealer.
2.3
EC Norms
The fixture meets all fundamental applicable EC requirements.
3. The level of technology of Concept Design 384 requires the use of specialised personnel
for all service applications; refer all work to your authorised
Coemar
service centre.
4. A good earth connection is essential for the proper functioning of the fixture. Never con-
nect the fixture if there is no earth connection.
5.
Mains cables must not come into contact with other cables.
6. Do not operate the fixture with wet hands or in an area where water is present.
7.
The fixture must never be located in an exposed position, or in areas of extreme humidity.