Coemar Concept Design 384, Руководство пользователя, Страница: 23 / 27

23
All the components of Concept Design 384 are available as spare parts from your Coemar service center. Accu-
rate description of the fixture, serial number and type will assist us in providing for your requirements in an efficient
and effective manner.
9.
Accessories and spare parts
10.
Maintenance
10.2
Periodic cleaning
Cleaning of the unit
Use a soft brush or a common vacuum cleaner or a source of compressed air for removing dust. For the cleaning
of the housing use a soft cloth and a non-aggressive cleaner. Check that the internal fans and heat exchanger
must be perfectly clean.
10.3
Periodic controls
Mechanical components
Check the correct working of the mechanical parts and, if needed, replace them. Make sure the fixture is not
mechanically damaged. If necessary, replace the worn parts.
Electrical components
Check all electrical connections, in particular for correct grounding and correct attachment of all extractable
connectors. Press the connectors if necessary and reposition as before.
10.1
Firmware update
The firmware of
Concept Design 384
can be updated through the RDM protocol (ANSI E1.20). Contact
Coemar assistance to receive the software and the device updater.
10.4
Fuses
Concept Design 384
has an automatic fuse that in most cases does not need to be replaced.
Accessory name Code
Hub 6 Channels RJ45 E032
RJ45 T Connection E038
RJ45 T Connection / solo E038/1
RJ45 inline extension coupler ELDG001
Connection cable RJ45 5m. CV261
Connection cabl RJ45 10m. CV262
Remote control FO9281/1