COEF 02a018, Руководство по эксплуатации

Страница: 15 / 20

http://www.coef.net - info@coef.it Pag. 15
9.0 TROUBLESHOOTING
PROBLEM CAUSE ACTION
The projector doesn’t swich on
The projector swiches on but
doesn’t answer to commands
Defecting projection
Projection with halo
The color or other effects
doesn’t coincide to the selected
value.
The PAN or TILT movement
doesn’t coincide to the selcted
value
- The power supply is not present
- The lamp is not working
- Wrong DMX configuration
- Defective cables
- Defective control unit
- The lens is broken
- Dust or grease stored on the all
parts of projector
- Dust or grease stored on the all
parts of projector
- Position sensor dirty with dust or
grease
- Cinghia rotta
- Defective motor
- Electronic board
- Defective motor
- Electronic board
Check if the luminous indicator is lighted
or not.
Replace the lamp.
Make sure that the projector is correctly
configurated.
Replace or repair the DMX cable.
Check the control unit by means of other
working projectors.
Technical aid is required.
Check that the lens are not broken.
Remove dust or grease stored on lenses.
Carefully clean the optical group lenses
and the projector components (see “Main-
tenance” chapter).
Carefully clean the optical group lenses
and the projector components (see “Main-
tenance” chapter).
Technical aid is required.
Carefully clean the optical group lenses
and the projector components (see “Main-
tenance” chapter).
Technical aid is required.