3
2.3 Lamp Loads Connecting
Connect the “live wire” of every lamp circuit
to the output terminal of
CODE Tc-182
respectively; connect the “neutral wires” of the
circuits to “NE” terminals of this set
.
The connection mode is as follow sketch map.
2.4 Connecting With A Console
CODE Tc-182
Thyristor Digital Switch Pack can be controlled by a console which generates DMX-512 digital
signal. The control signal connection mode is as follow sketch maps:
2.4.1 DMX signal connectors
2.4.2 Connecting With A Console
Pin No.
Connection
1 GND
2
S- (Signal -)
3
S+ ())
