11
Battery Charging and Best Practices
It is recommended to fully charge each new
battery before the first use even though a new
battery may have residual power upon
receiving.
Battery Charging
Place the B718 battery into the charging
station.
The battery can also be charged within the
CR7020 case via Code’s micro-USB cable
(CRA-C34).
The case will charge faster if the
USB cable is plugged into Code’s USB wall
adapter (CRA-P4). It will take approximately 3
hours to fully charge using this method.
The battery fuel gauge LEDs will light up, indicating the battery’s state of charge. The table
below presents the charge definition per LED. The LEDs will turn off after approximately 15
minutes once the battery is fully charged.
Micro-USB Charging Port
>10% - 19% charge
1% - 10%
charge
>19% - 39% charge
>39% - 69% charge
>69% - 99% charge
