Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-153-H
page 10 of 26
Public Address System
Administrator Guide
terminations (See
Figure 5
on Page 18).
5.1.4.5 Run the supplied amplifier wiring harness, beacon/strobe power har-
ness (red/black), beacon/strobe auxiliary harness (yellow/yellow), 7 pin
control cable and RJ-11 audio cable to the top of the bollard. Connect
the molded quick connector on the red/black harness to the manifold
connector on the transformer. Connect the yellow/yellow harness, 7 pin
control cable and RJ-11 to the phone board. Connect the large white
connector of the amplifier wiring harness to the wiring connector on the
transformer. Refer to the included wiring diagram for wiring termina-
tions (See
Figure 1
below).
5.1.5 Install 360° PAS Speaker Unit
5.1.5.1 Connect the red/black and yellow/yellow wiring harnesses to the red/
black and yellow/yellow wiring pigtails coming from the beacon/strobe.
5.1.5.2 Connect the 6 pin wiring harness, 7 pin control cable and RJ-11 audio
cable to the ports on the amplifier.
5.1.5.3 Set the PAS speaker unit on the adapter ring, lining up the screw holes
at the bottom of the unit. Secure the speaker unit with the provided
security screws.
5.1.5.4 Reapply power to the unit.
Figure 1
