Code Alarm CA-640, Руководство пользователя

Страница: 11 / 20

11
When Your Security System is Triggered
The Code Alarm CA-640
TM
will trigger if one of the following events
occurs while the system is armed:
• Any protected entrance is opened
• The vehicle ignition is turned ON
• The vehicle is jolted hard enough to signal the impact sensor
Once the alarm is triggered, the siren (or horn) sounds and the
vehicle parking lights flash for 30 seconds. The system will then re-
arm, awaiting the next intrusion attempt. To stop the siren while
keeping the alarm armed and doors locked, press the LOCK button
while the system is triggering.
The Status Indicator is a high-intensity blue light mounted in a visible
location on the vehicle dashboard. This blue light gives a visual
indication of the alarm system’s state of operation. Note the chart
below:
If the Status Indicator is... ....then the Security System
Off is disarmed
Flashing Slowly is armed
Flashing Very Quickly was triggered in your absence
(see Attempted Intrusion ID - page 5)
Flashing Intermittently is in Valet mode
(2 flashes, off, 2 flashes)
On (not flashing) is in Pre-arm mode
ca-640 owners.pmd 9/9/2004, 4:19 PM 11