Optional Songbird Feature
The optional songbird feature (Code Alarm part # SB1 and labor required) allows you to program
songs and tones to your system (i.e. Setting a different tone for Lock activation and Unlock activation).
Turning Songbird On:
Press and release the TRUNK icon button on the remote control, then press and
hold the LOCK icon button on the remote control within 2 seconds. The SB1 speaker will give notification
that Songbird has be turned ON.
T
urning Songbird Off:
Press and release the TRUNK icon button on the remote control, then press and
hold the UNLOCK icon button on the remote control within 2 seconds. The SB1 speaker will give
notification that Songbird has be turned OFF.
Setting Songbird Tones:
Press and release the TRUNK icon button on the remote control, then press
the OPT button on the remote control within 2 seconds. Press the LOCK icon button on the remote
control or UNLOCK icon button on the remote control to scroll through the different tones.
While in this mode, the TRUNK icon button on the remote control will change the length or version of
the tone.
Press the OPT button on the remote control to select the desired tone and exit programming.
Please see your sales associate for details on Song Bird or any other Code Alarm accessory.
Replacing Remote Control Batteries
The two (2) 3 volt lithium batteries (model CR2025) inside each remote control should last
approximately 1 year under normal use. When the batteries become weak you will notice the
transmitter range (the distance from the vehicle the remote control will work) deteriorate and the small
indicator light on the remote control will dim. To replace the remote control batteries:
1.
Using a small (#1) phillips screwdriver, remove the screw on the back of the remote control.
2.
Gently unsnap the halves of the remote control apart.
3.
Slide the 2 lithium batteries out of the circuit board, observing the +/- symbols on the
batteries and replace with new lithium 3 volt batteries (model CR2025).
4.
Gently snap the halves of the remote control back together and reinstall the phillips screw
on the back of the remote control.
5.
Test the operation of the remote control.
6
Содержание CA-150
Страница 9: ......