20
7. System Testing,
cont’d
If door, sensor, hood/trunk or ignition input is triggered:
1. Siren/horn sounds for 30 seconds or until UNLOCK is pressed.
2. Parking lights flash / LED flashes quickly for duration of alarm cycle.
3. If the alarm system is triggered, pressing LOCK will end the
30-second cycle while leaving the system armed and locked.
Note:
The unit will ignore a trigger input if same input triggers alarm 5
times during one arm cycle. The LED will continue to flash quickly
to indicate that the alarm has been triggered.
After alarm has been triggered and the 30-second cycle has
elapsed, pressing UNLOCK will sound 4 chirps to indicate an
intrusion. Enter vehicle and press the override button once to
determine which input triggered the alarm.
Siren/horn chirps a number of times to indicate which input
triggered the alarm:
Number of Chirps:
1 - Interior Theft Sensor
2 -Door input
3 - Hood Input
4 - Trunk input/External Sensor
5 - Ignition
If Passive Arm option is set to On:
System will arm 60 seconds after key is turned off.
Press UNLOCK
1. Doors unlock
2. Factory alarm (if equipped) is turned off.
3. Siren sounds once / parking lights flash once.
4. Courtesy lights turn on for 60 seconds, or until ARM is pressed or
ignition is turned on.
5. Vehicle starter is enabled.
6. LED turns off (if alarm was triggered, LED will flash BLUE quickly).
Press UNLOCK twice
1.
*
If Silent Choice Verification is set, siren (or horn) sounds once.
2. Passenger doors unlock if using 2-stage unlock.
Press FIND/PANIC
Siren/horn sounds 5 times.
Press and hold FIND/PANIC for 1 second
Siren/horn sounds and lights flash for 30 seconds or until any
remote control button is pressed.
Press and hold ARM
Headlights (or other device) turn on for 20 seconds or until LOCK
is pressed again.
CA-130 install rev 7-04.pmd
7/28/2004, 3:32 PM
20