14
D. Adjusting the On-Board IT-s
TM
(Interior Theft Sensor)
The IT-s
TM
is factory pre-set at a moderate sensitivity level and has
two adjustment points: Lite-Touch and Full Shock.
Adjusting Lite-Touch Sensitivity:
1. To program the sensitivity of the lite touch trigger, simply enter into
option bank 1, then advance to the Lite Touch Adjustment feature 1.
Once in the Lite Touch Adjustment option, use the LOCK button of
the transmitter to increase, and the UNLOCK button to decrease the
sensitivity.
2. To verify the sensitivity, strike the vehicle (while in programming)
with the amount of force you feel is acceptable for a lite touch
trigger. If the system chirps, it will recognize that force; otherwise
increase or decrease to obtain proper sensitivity.
Adjusting Full-Shock Sensitivity:
1. To program the sensitivity of the full trigger simply enter into option
bank 1, then advance to Full Shock Adjustment feature 2. Once in
the Full Shock Adjustment option, use the LOCK button of the
transmitter to increase and the UNLOCK button to decrease
sensitivity.
2. To verify the sensitivity, strike the vehicle (while in programming)
with the amount of force you feel is acceptable for a full trigger. If
the system chirps, it will recognize that force; otherwise increase or
decrease to obtain proper sensitivity.
Note:
There are 64 levels of adjustment in each option. Once the
highest/lowest sensitivity is achieved, the siren/horn will
sound an extended pulse to notify that you are at the end of
the scale. Decreasing sensitivity one more step from the
lowest end of the scale will shut that zone off.
4. System Power-Up and Programming,
cont’d
CA-130 install rev 7-04.pmd
7/28/2004, 3:32 PM
14
